Bond. James Bond Coat.

Wanna see day one of my Kitchen Transformation?  Click here.  Want the before photos?  Click here.

So…yesterday turned into a bit of a DIY marathon.  By now you know me well enough to know that I have a problem quitting, stopping, quieting my mind.  When I’m in the middle of a project, especially a project I have set a deadline for this problem with stopping grows even more intense.

Last night I painted until about 11pm.  Then I was simply too pooped to take another brush stroke.  And if I was too tired for another brush stroke, you can bet your bottom dollar that I was too tired to shower.  That’s one of the few perks of having your husband away.  With no one else in the house I don’t feel peer pressured to keep my cleanliness intact.  But for all wider purposes, yes…I usually shower on a regular basis {kind of} and I believe hygiene is an important aspect of life {even if it is a bit of a drag.}

But now I’m getting off track.

Back to the kitchen.  I’d offer you something, but things are kind of a wreck in there.

Yesterday I kicked off my day with a few hours of photo work.  {Those two sessions I wrote about on my first project day are now done!}  Then it was off to the gym at 10am for a bit of personal training.  Home for lunch…then work time.

As luck would have it on my most intense day of painting my dear friend Shea was off work and willing to help me paint.  I taped off the places I wanted to protect, then we dove in.  So we started around noon.  Per the DVD instructions, we started with the cabinet frames.  Paint with the wood grain.  Vertical on the vertical parts…horizontal strokes on the horizontal rails.  They call this the bond coat.  I don’t know why…but that’s what it is and I think it’s a cute name.  Bond Coat….

Shea and I worked until she had to leave at 4:15.  By that time we had two good coats on the cabinet frames, drawer fronts and cabinet backs.  The cabinets {PS} are all laid out in my garage on all kinds of makeshift tables.  Saw horses, a table saw table, buckets, an old planter, even a couple cardboard boxes are supporting my cupboard doors.  It’s janky, but it’s the only way I could get them all laid out.

Work Surface

After Shea left I took a little snack break.  Upon further inspection, I knew everything would take a third coat.  That was a big bummer because the box and DVD said two coats would do the trick.  Despite the extra time and work, I want this to look awesome, so I started on a third coat.  I hit the cabinet backs once more, then it was time for youth group.

I got home from hanging out with my favorite teens around 9:30…after making a pit stop at Pita Pit for a garden pita.  I ate and watched some AGT until about 10.  Then I repainted the cabinet frames with a third coat.  When I went to bed the kitchen was looking like this.

Bond Coat Complete

Bond Coat Complete 2

Bond Coat Complete 3

As you can see in the evening I had some extra special help, and he’s eating in the photo above.  Yes, that is Panda Kitty’s BFF, Bandit.  Well, he’s actually her only cat friend.  And they really aren’t that close.  He chases her around and she hisses and growls.  It’s a unique relationship.  I’m getting off topic again.

I’m left with a big dilemma.  What color for the walls?  And…How fast can I get rid of that over-sink fixture?  I’m dealing with those questions tomorrow {or maybe a little tonight…}

I’ll try to take a few more interesting {embarrassing photos of myself} photos tonight to make tomorrow’s update a bit more entertaining.

It’s coming along well, though.  You may have caught on earlier when I said I work to the bone when I’m on a deadline.  You may be wondering, What deadline?  Well friends, my dear mother and father will be here Sunday.  So ideally it’ll all be put back together by then.  Stay tuned!

Amy

Day 1: Deglossing {how I get it done}

Usually when I do projects I put off writing a big post about it until the project is all done.  Then I show you the whole process.  This time, I thought I’d try something different.  I get a lot of questions from friends asking how I do it.  How I tackle a project all by myself, power through and get it all done in a {sometimes very} short time.  So here goes.  This week I’ll be updating every day on the progress of the kitchen.  So, if you aren’t in to home improvement…hopefully you are into my awkward sense of humor, because this week is dedicated to the kitchen.

Yesterday’s post talked about some of the prep.  I got the doors off and moved outside, I bought all the stuff I needed to do the project and moved what I needed out of the cupboards.

Today was even more prep.  FYI prep stinks.  It’s the worst, most important part of any project.  And for this project it took forever.  Like all day forever.

I got up at my usual I-don’t-have-to-work-at-the-gym time of 8:30 am.  I had some coffee, did some Googling, drank a smoothie and watched the end of last night’s installment of the Harry Potter series.  {I’ve been working my way through the entire series in bits and pieces.  This morning I finished #6…but I always skip the part when Dumbledore drinks that potion.  Too sad.}  After that I edited some photo orders….they’re just about done.  All that took me to 10 am.

That’s when I started step one of the Rustoleum Cabinet Transformation kit:  Deglossing.

The kit comes with a DVD.  Which is good for me, because it shows {in theory} what every step should look like.  But here is the difference.  In the video the girl doing the demo looks like this:

Degloss demo

Cute hair, nice outfit.  Basically DIY chic.  Here’s what deglossing looked like at my house:

Cabinet Deglossing

Khaki shorts that were nice until I sat in paint a few days ago, a million Sham-wow’s, glasses {AKA protective eye-wear}, dirty legs from sitting on the garage floor.  Yeah, it’s a different look.

Okay, despite what it looks like, deglossing is a big deal.  You squirt this stuff on a scouring pad, wearing latex gloves {I did wear them, pinky swear} then scrub, scrub, scrub.  I spent about 3-4 minutes on each cabinet surface {front then back}.  That really adds up.  My wrists were sore, I was sweaty, my elbows were starting to crack.  I started inside with the cabinet frames.  Then I took a short break to write a few emails and edit a few more photos.  Then the cabinet fronts.  Then break for an episode of the Office and a few more photos.  Then the cabinet backs.  I started to get really sloppy because I was getting so tired, hence the breaks.

All in all this took me the entire day.

I was nervous about not having enough deglosser for all my doors.  But that proved to be a silly fear.  I had plenty.  So much, I even went back over a few pieces that I had skimped on the first go around.  I still had some left  at the end of the day {which today was around 6:30 pm}.

After I absolutely could not get any more gloss off of the frames, doors or drawers I filled the handle pilot holes with wood putty and called it quits.  I watched the next segment of the how-to DVD.  Then I took a shower, posted some youth group photos on Facebook, and headed to a friend’s house for an evening showing of the 2000’s classic….”Summer Catch.”  Yep, the one with Freddie Prinze Jr and Jessica Biel.  While watching I’ve written this post, sent some more emails, snuggled one of the world’s cutest babies and Skyped with Derek.  When I get home tonight I’m going to put up painter’s tape.  Tomorrow I’ll start putting the paint on.  That’s the exciting part.

So that’s how I did it today.  I won’t lie to you.  Today really blew.  I was so sick of scrubbing I could have screamed.  It was hard, but not…hard.  Physically demanding, but anyone, even you can do it.  {And as a side note, Mary Jo…Mom told me you are thinking about doing this up at the lake house.  You totally could.  But wait until I finish so you can benefit from all my mistakes…}  Tomorrow I’ll have some more visible progress for you.  For now, it’s official, I’m past the point of no return.

See you tomorrow.

Amy

The Kitchen

Derek doesn’t read my blog.  Well, I shouldn’t tell you that he never reads it.  He does sometimes.  Just not often.  He doesn’t really need to.  We talk, he sees me, he lives with me {well, most of the time} for goodness sake.  Basically he knows all there is to know about my goings on.  There is no need for him to spend time reading a recap of what he witnessed first hand.  He lives the adventure…and gets bonus features.  Like all my lame jokes, seeing the awkward unfold before his eyes, and putting Band Aids on all my mishaps.

Between you and me, I think he gets enough of my madness as is.

All that to say…I’m pretty sure I can safely write to you about my next project without Derek finding out.

He will find out, of course.  Unless he decides to stay away forever…Which I know he would never do.  So yes, he will eventually see the results of my latest effort.  So that begs the question…why does it matter if he reads about it or not?

Two words:  Painting.  Cabinets.

You see, most boys aren’t fond of the idea.  And Der-Bear is no exception.  But you know what I’m not a fan of?  Cooking in a dark, ugly closet.  And that’s pretty much what my kitchen is/was like.  Derek’s big objection is that the cabinets are real wood.  They are very nice, very heavy.  They’ll still be wood even after they are refinished, right?  Right.  I know in my heart of hearts it’ll look loads better when I’m done.  Derek will agree too.  I just know it.  Sometimes, though, it takes a little beyond-the-point-of-no-return convincing.

Let’s me honest.  There isn’t a lot Derek can do to stop me if he isn’t home.  Which, in my eyes, makes this the perfect time to tackle this project.  That way he can’t talk me out of it…

Here’s what I’m talking about.  This is the kitchen before.

Kitchen Before

Kitchen Before 2

Kitchen Before 3

As of this very moment the kitchen is looking like this:  Doors off, drawers out, hinges removed.

Cabinet doors off

And just look at this pile of hinges and hardware.  For such a small kitchen there are so, so, so many doors.

Hinges and Hardware

Tomorrow {or tonight if I get a second wind} I’ll be deglossing and prepping the surfaces.  I’ll be using Rustoleum’s Cabinet Transformation box kit.  I love the Rustoleum products…so I’m anxious to give this a whirl.  More on that later.  Now a snack.

Amy

Clever and Quick Jewelry Organizers

Tonight I went out for some dessert with my friends from Bible study.  I’ve been practically living in my gym attire, so when I get a chance to wear regular clothes, slap on some mascara and be seen in public…I jump.  Tonight I even wore {gasp} a necklace.

Which meant that I went into the guestroom, opened the top drawer of the dresser, dug through some packing paper {where most of my necklaces are still packed from two moves ago}, found something worth wearing, and put it on.  It’s a mess in there.  And, honestly, embarrassing that I have a lot of really awesome stuff shoved in a drawer, still packed from when we lived in Oklahoma.

Case in point, I need an organizing solution.  Here are 11 of my favorites.  I’ll probably pull inspiration from from a few of these and come up with a custom solution perfect for my space and collection.  In the mean time, get a little inspiration of your own.  Right here.

diy jewelry organizer round up

1.  HGTV has a great tutorial for making these cute organizers from cast off wine crates.  Not a wine drinker?  Your local liquor store may have crates on hand that they toss after a shipment comes in.  Pro…this is beautiful.  Con…will all of my necklaces fit??

2.  I bought a frame from Hobby Lobby on clearance that looks just about like this.  It’s on my gallery wall.  Originally this was an item for sale on Etsy.  But Allender readers are super savvy, so I know we could whip one of these up on our own.  So clever for organizing earrings.

3.  This is a great idea from Infarrantly Creative, and it’s super cheap!  These are paint sticks {free} from the hardware store.  Painted and adorned with cup hooks.  The best part of this design is that lots and lots of bling can be stored this way.  I think this idea could transcend into the craft supply realm as well.

4 & 5.  These two images are of the same organizer.  Also from Infarrantly Creative.  There is a killer tutorial on how she made this sneaky organizer.  I love it because it can masquerade my mess as classy art work.

6.  Shelterness shared this organizer.  It’s simple and effective.  I like how there are bins at the bottom to catch all the random bits and pieces.  Oh, and the shelf space on top isn’t bad either.

diy jewelry organizers

7.  I love the idea of building an organizer with pallets.  Especially since I can pick them up for free.  This may be too bulky for my room.  But that won’t stop me from loving it.  {From the Rustic Creek Etsy shop}

8.  I saw some shutters sitting on the curb in my neighborhood a few weeks ago.  How I wish I had picked them up.  Maybe they will throw out some more.  At any rate, this shutter organizer from Celebrating Everyday Life is so simple to make and it’s tall and skinny so it can fit in a tight spot.

9.  I think vintage wooden hangers are just beautiful.  I can see three or four of these bad boys lined up on my wall.  All Our Days came up with a great solution.

10.  Apartment Therapy featured this easy to make organizer from Solaana’s Flickr page.  Go on over to their site to get to the original image.  I’ve even seen these accordion peg hangers at Dollar General!

11.  Who doesn’t love an old, rustic window frame?  Husbands, maybe.  But we all know boys can be weird.  I am loving window frames right now.  And this organizer is just adorable.  I love how the look can be customized with scrapbook paper or fabric.  Our Borrowed Abode has a great tutorial on how this beauty is made.

How to make a patio and impress your friends.

Outdoor Conversation Area

Okay folks.  Today is the day I show you how I made my outdoor room dreams come true.  I’ll tell you what I did, what I bought and where I got it.  Heck, I’ll even tell you things that I got wrong so you can get them right.  Now, I know you’ve seen this photo a million times…but here’s the shed.  This is what I started with.

The first challenge was getting rid of that thing.  Originally I had thought the toughest part of getting that out of the yard would be convincing Derek that it was a good idea.  But, well, then he had to leave for a bit.  And there is very little he can do to stop me via Skype.  So I made sure all our stuff had a home in the garage or the garbage can and listed this bad boy online.

A nice gentleman and his wife wanted it.  They came, dissembled it and hauled it all away.  Then I was left with this…Which, according to the neighbors, was already an improvement.

Patio scrap wood

There are a couple things you can note from these images.  First of all…I used the packed dirt where the shed had been to do a little spray painting.  That’s from a frame I repainted for my gallery wall.  Next you can lay your eyes on all the other junk trash usable materials without the shed to distract you.  At the time I didn’t know if or what for I could use all that weathered wood, but I decided to keep it on hand…just in case.  It was all pressure treated, so despite it’s color it was actually pretty good quality.

In the end, keeping it proved to be a good choice.  Now I have a table and benches to match.

Leveling Dirt

Next came the most challenging part of this whole process:  making the ground level.  This was hard for a few reasons.  One being that there were two stumps and a chunk of rail road lumber in the dirt where the patio would be.  I had decided on a 10×15′ patio space, so I needed to level the ground where the shed had stood as well as the surrounding area.

I looked at renting tools to remove stumps.  {I’m too cheap.}  And tutorials on burning them out.  {Too impatient…I was itching like a kid with poison ivy to start laying bricks.}  Eventually though, I decided to just dig.  If I couldn’t get them out…well…then I’d have to resort to different measures.  So I dug down around each stump.  It was pretty easy going because the stumps were a big rotten underneath.  When I hit a root that my shovel couldn’t cut, I took an axe to it.  This took a bit of time…and boy were they heavy to pull out, but out they came.

To get the rest of the area leveled, I began shoveling the elevated dirt from the shed’s foundation to lower areas.  In places where grass would be covered I dug it up and transferred it to that dead dirt patch you saw in the previous image.  There is no secret to this.  Just one shovel at a time.  I packed the dirt down with a home-rigged tamp and checked for level until it was pretty much even.

Laying a brick patio

Now I had to make a big trip to Menard’s.  I picked up edgers to contain the patio floor {that’s those long gray stones around…well…the edge}, play sand {the cheap kind you’d use in a sand box}, and a steel fire ring {nothing too fancy since it would be covered by brick anyway.}

First set your edge blocks.  This is a bit hard and time consuming.  They need to be set in the dirt a few inches to be firmly held in place.  And they need to be level.

Now…let me take a moment to talk about level on a patio.  You do not want things to be exactly level.  Yep, you read that right.  To allow water to run off, set your stones on a slight {very slight} slope.

So put your edgers in one at a time.  Check for level after each one.  Use a square on your corners to make sure they are 90 degrees.  This friends, I did not do.  And boy was it a mistake.  If you come to my house you’ll notice a weird side of my patio.  That’s because it’s not perfectly square.  Bummer.  So check for level and square.  It’s worth it.

Once your perimeter is in place rip open those bags of sand.  The area of my patio is about 150 ft sq.  I used 30 bags of sand at 50 lbs each.  You need a bed of sand at least an inch deep.  So pour it in.  Then level that out.  I used a little contraption my dad showed me how to make.  You can see it in the first image above.

Take a long level length of wood.  {I used a 4×4 post I dug out.}  Lay that across your patio space, resting on the edgers.  Attach a second, skinnier piece to its side.  Attach it so that it hangs down to the point you want the bottom of your pavers or bricks to rest.  In my case, I used 2.5″ bricks, so my board {the green one above} hung 2.5″ down from the edgers.  With your long post resting on the edgers, drag it across your area {best if you invite a friend to help}.  No you have level sand.  Make sense?  I hope so.

Once the sand has been leveled out, you can start laying your stone.  Again, always check for level.

Finishing a patio

I used a quick set mortar to hold the bricks in place around the fire.

After all your bricks are in place get a few more bags of sand.  {I used 2.5 50 lb bags.}  Dump some sand out and start sweeping it into the cracks.  Do this over several days as the sand settles.

Then furnish your new space.  As I told you in previous posts…the pair of chairs was a Salvation Army find for $30 total.  I recovered them.  The bench was pulled from a local variety shop in town.  The cushions were a summer clearance item from Target.

It looked good…but I craved more.  It needed light!  I have no trees around the patio to hang them from…so I came up with this alternative.

Back to Menard’s.  This time for new 2×4’s.  I bought 4 12′ posts and 2 10′ posts.  At each corner of the patio I dug down three feet.  Yes, that’s deep.  Then I cemented the four tall posts in with Quickrete.  Check for level!!

Adding light to a patio with no trees

Grab a friend for this next part.  Once the concrete has dried completely, you can hang the upper lintel.  I did it alone…but I really don’t know how I manages it.  Screw them in place with deck screws.

I used 5 strands of 20′ patio lights from Target to create a canopy of light above the patio.  I ran each strand between the posts around nails that I put in the top of each lintel.  After wrapping the cord around I hammered the nail head down slightly to hold the cord in place.

Then I moved all the furniture back in and boom…patio, roasted.

DIY Outdoor Room

Other things on my shopping list:

A grate to cover the fire pit…that’s code here in PraCan.

An adorable ottoman…super sale from Target for only $12.00

Plants for planters recovered from the yard

A white extension cord to power those precious lights {Target}

Two mercury glass lanterns from Menards

Two citronella candles to ward off the state bird of North Dakota {mosquitoes}

Did I miss anything?  If you have questions that I didn’t cover…let me know!  I’d love to hear from you.  And yes, I did this.  Me.  A girl.  With no husband in sight.  I’m terrible at math.  And only moderately strong.  If I can, you can.

Amy

Mele Kalikimaka, baby {Patio Reveal}

A month or so I told you about my Mele Kalikimaka moment.  If you have no idea what that means…read the post here.  When I started with the patio I really wasn’t sure how it would all come together.  But it’s done now, and I think it turned out pretty nice.  At very least, I think we can all agree that it’s an improvement from the rusty shed that I started with.

Patio B&A

You like?

I do.

I’m still missing a little grass around the edges, but in the big scheme of things it’s not such a big deal.  And the craziest thing about it is I did it all by myself.  Well…that’s not entirely true.  I had some help hauling bricks.  And a bit of help leveling the soil.  And moving furniture.  But it’s been a one man show for the most part.

Outdoor Conversation Area

DIY Patio

It’s twinkly.  It’s warm, cozy, inviting.  It looks like summer.  I’m really happy.  Now who wants to come over and hang out?

Tomorrow I’ll give you all the tips and tricks I learned along the way.

Amy

Entertaining the Neighbors

I wish I took more self portraits.  That way I could show you just how ridiculous the things going on at my house really look.  But alas…I’m much too busy with my projects and hurting myself…and doing things in weird, awkward, one-man-show type ways to stop and pose for a selfie.  Maybe I’ll work on that in the future.

So, you’ll never believe this, but…the patio is done!  Yep.  Done.  As in finished.  As in I’m hosting my very first big party on the patio on Saturday.  You’ll have to wait until tomorrow to see some photos though.  I put the finishing touches on it this past weekend.  While doing so, I got to thinking about what the neighbors must think.

You see, Derek and I moved into our house just about a year ago, but up until recently–while he’s been gone– we didn’t know any of the neighbors.  My sole interaction with one of them was just long enough for Henry {yes, that’s his real name and he is married to a Betty–adorable, I know!!} to tell me not to shovel my snow over the property line.  So I didn’t.  And I minded my own business.  And I went about my business.  Then something happened.  I think I sort of morphed into that “crazy person” down the street.  I started unleashing fury on my project list and in turn, created a bit of a spectacle.

At first I only noticed some looks from folks driving by.  Then walkers turned into gawkers.  Then the neighbors started asking questions.  I get pretty shy and awkward when approached sometimes.  I don’t mean to, but it happens.  For as many projects as I’ve done, I still get kind of self-conscious about my abilities.  Especially while Derek is away.  When people see me working and stop to chat about it, I always figure they know more than me {which they probably do} and think I’m a fool because I’m going about things the wrong way {which may or may not be correct.}  So when the neighbors started coming around to ask what I was up to I got nervous.  We own the corner lot, so everyone can judge see my antics.

Overall, to my relief the response has been overwhelmingly positive.  Now I not only know my neighbors, but consider them friends.  Even Henry and Betty…who have proven to be gems.  I’ve even met some people who live in the surrounding blocks.  They’ve stopped by the fence to say “hi” and ask where I get all my nonstop energy.

At the very least I think I’ve been a pretty good and cheap source of entertainment.  Especially since several of my undertakings have really been two person jobs that I’ve jimmie-rigged to be solo acts.

Tonight I thought I’d take a brief moment to look back some of this summer’s finest moments that could have been seen through the windows of the houses next door.

1.  Before the weather really turned I was busy working on the bedroom.  That meant many, many days a mysterious neighbor girl hauling roll after roll of carpet out of the house.  And several garbage days that looked like this:

Garbage Day

2.  First of all, the process of moving everything from our ugly, rusty shed to the garage.  Then a stranger coming and dissembling the shed to take it away. {Oh, and let’s not forget the spray painting projects that were done in the yard.  You can see remnants in the photo below.}

3.  I spent an afternoon putting all of my body weight and energy into wiggling 4×4’s loose and pulling them up out of the ground from the area around the shed.  Yeah, that stuff down there.

4.  I have only had one vehicle parked in the garage all summer because the other half has constantly been devoted to project space.  When the garage has been opened passerbys have been able to see chairs being rehabbed, pallet benches in the making, fence posts turning into window boxes, planters being filled and crap wood being turned into a table.

5.  While we are talking about the garage…there’s a good chance a few people have spotted me using my car as a ladder to reach high items in there.  Someone saw my hand and feet prints in the saw dust that had accumulated on it and asked if someone had been standing on my car.  Yes, weird…it was me.

6.  Several may have heard me udder some form of gibberish profanity when I dropped a patio edger on my thumb.  It feels better, but looks a bit worse.

Smashed thumb

7.  And let’s not forget load after load of bricks for the patio.

8.  Speaking of the patio…I’m sure watching me dig and level the ground was a treat.  I dug up three 5-gallon buckets worth of landscape rock from where the shed used to stand.  Let me tell you this.  Hauling those away was not a graceful looking task.  I’m strong, but not that strong.

9.  One day I didn’t have time to leave the house to do my personal training at the gym, so I had my client come to my house.  We got some weird looks for doing lunges, weird kicks and sprints across my yard.

10.  Maybe the most awkward, entertaining thing I’ve done all summer has been finishing the patio {let’s be honest, it’s an outdoor room} project.  I wanted to hang a canopy of lights so I built a post and lintil structure on either end of the patio.  Simple enough…but getting the lintil up alone was quite a challenge.  Let’s just say there was a ladder, a prop, a second ladder, some words not fit for children and a lot of luck involved.

11.  Yesterday I spent an hour sledge hammering  a bunch of concrete I found after the shed came down.  I felt like Thor.

12.  Summer is coming to a close up here in PraCan…and so is my outdoor project list.  But I’ve got one more big one up my sleeve.  What is it?  Who knows?  I’ve had a lot of questions and I’ve explained it to many.  My response is the same for all my undertakings:  if something goes terribly, horribly wrong, I’ll just rip it out…sledge hammer it…or chain saw it down and pretend it never happened.  So…any guesses?

Amy

Salvaged Lumber Picnic Table {Build It}

Today I’ll show you how I {yes, me…all by myself} built this table and benches for my patio.  Are you impressed, or what?!

 table from salvaged lumber

I have to say, this is one of my greatest before and afters.  After my shed came down from the space that I wanted to lay the patio, I was left with a bit of a mess.  Wood from the previous home-owner’s garden frame was left hanging around…then, as I leveled the ground I discovered quite a few landscape timbers lying in the dirt around the space that the shed used to stand on.  I knew I wanted a place to sit and eat outside, but even the simplest table and bench combo was going to set me back several hundred dollars.

Not happening.

So I got creative, collected the resources I had on hand and got a little gutsy…and I made this happen.

Patio Table B&A

The inspiration for this project really hit me when I visited the Vintage Fair here in Minot a few weeks ago.  I had been all over and racking my brain trying to figure out a way to get a table for my new patio without breaking the bank.  I had kind of hoped to find something I could use at the Vintage Fair…but no luck.  Instead I came across a table that was PERFECT in every way, except for the fact that it wasn’t for sale.  Bummer.  This is it:

It was apparent that at one time, this table had been made with scrap lumber.  Even though I couldn’t go home with it, it sparked an idea.  Like a big cartoon thought bubble, my mind was filled with the memory of all that crap wood I pulled out of the yard.  Bingo.

I was a little worried, because I’ve never been much of a carpenter.  The closest I’ve come is following Jesus…and a couple woodworking projects with my dad when I was a kid.  {But let’s face it…I was mostly an innocent bystander for the majority of those shop projects.}  But I armed myself with lots of photos of this table, from every angle I could get…and I went home to replicate.

Here goes nothing.

DIY Table from Salvaged Lumber

1.  First I did a little Googling to figure out how tall a table usually stands.  Most plans say 30-31″.  I cut up this tall 4×4 to four 30″ lengths.

2.  Next I did a little more Googling to find the typical width of a table.  I wanted mine on the slender side to conserve space, so I decided on 28″.  I cut four pieces to 28″.  These will hold the legs in place.  For this part I actually used a couple spare baseboards from the bedroom redo.

3.  Nail those suckers in place.  Make sure the top of your 28″ piece is flush with the legs and that the legs are square. Nail one brace to each side of the 4×4 legs.

4.  Repeat that process for the second pair of legs.

5. To lend additional support you’ll need to come up with four more pieces to attach in an X to the legs.  I also thing this looks super cute.  I found some old fence posts{?} behind the garage.  So I used those.  You want one end to rest right under the brace.  To make measuring easier I laid my leg piece right on top of the piece I wanted to use for the X.  Then I drew a line and made my cut.  Attach one to each side of your legs.

6.  Next decide how long you want your table to be.  For my space 6′ was just about perfect.  Stand your table legs apart and lay some long planks across the top.  I used the two sides from the “garden” and one leftover deck plank.  When you’re happy with how it looks nail them in place.  Use at least four nails per end, per board.  {2 into each brace.}

For this project I used all nails.  Partly because that’s what the table at the Fair was made with and I liked the rustic feel of seeing them.  Partly because that’s what I had on hand.

I so wanted to be happy with it just like that.  All rustic and mis-matchy.  But…you know me.  Nothing is complete without a little white paint.  I felt like it would really unify the table with the rest of the patio {ahem…my awesome chairs} if I painted it.  I painted the legs and left the top alone.  I love its weathered gray tones.

DIY Patio Table 2

Now on to the benches.  Those were so easy!  They are like mini tables, so once you’ve done the big part these will be a breeze.

DIY picnic bench from landscape timbers

First build your legs.  Google told me the bench should be about 18″ tall, so I had to do a little math.  The landscape timbers are 3″ thick, so I cut my legs to be 15″ tall.

Next decide on your seat width.  I made mine on the narrow side so I could store them under the table together.  These are 10.5 inches wide.  Cut your braces and attach them.  One to each side of each set of lets.

Then nail your long timbers across the top.  My benches are 54″ long.  Again, so they could be stored under the table.  Since these timbers are so thick I had to make a run to the hardware store for extra long nails.  This was my only expense in the whole ordeal…$4.59.  I’d say that’s a pretty good deal for a table and two benches.  And as an added bonus I don’t have so much junk lumber laying around my yard.

Just like with the chairs yesterday, if you want this to last you’ll need to use products made for being outside.  All this lumber is pressure treated or cedar {with the exception of those two baseboards} so I know it’ll hold up.  The paint I used is more of that white deck stain from last summer’s Deck Redo.

And, for real…if I can make this, so can you.

Salvaged Lumber picnic table

Amy

GET YOUR FREE 3-DAY KICK-START

Renew your zeal for the Bible with three days of exclusive devotionals! Interesting and relevant writings and reflection questions will remind you why the Word of God is so awesome. You'll learn a lot and you'll leave excited to know God more and grow deeper in your faith.

Your kick-start is on the way!

free printable chronological bible reading plan

You've always dreamed of reading the Bible in chronological order. Now you can!

Getting my printable PDF plan is easy. It's not fancy, but it does fold easily into a bookmark, so you can keep it close by and easily see what's coming next. I hope you find it as useful as I do.

**Remember to check your PROMOTIONS FOLDER. Even if your confirmation comes to your normal inbox, the actual download may come to that pesky promotions folder instead!**

Your PDF is on the way!